剪切泵JQB80J剪切泵QB100J剪切泵QB120剪切泵

剪切泵JQB80J剪切泵QB100J剪切泵QB120剪切泵

 剪切泵專門用于剪切鉆井液的聚合物和粘土，在鉆井液系統中的聚合物(或粘土)應提前充分地剪切后，再進入鉆井液系統，改善鉆井液性能，才能充分發揮其效用，如果沒有充分剪切，聚合物在第一次循環中就可能堵塞振動篩網，損失大量的聚合物，增加鉆井成本，并且還可能使鉆井液中的大尺寸的固相顆粒硬而難以除掉；在鉆井液中，由于沒有充分剪切，聚合物會產生許多“魚眼”，這些“魚眼”會傷害地層，使地層滲透率降低，油氣層減產。

剪切泵  JQB80J剪切泵  QB100J剪切泵  QB120剪切泵

剪切泵JQB80J剪切泵QB100J剪切泵QB120剪切泵產品特點

1、JQB系統剪切泵加工質量高，可靠性高。

2、采用了綜合機械密封技術，新穎別致的設計，國內外首創密封性能先進，運行可靠，而且使用壽命長；

3、大大提高搬土顆粒的水化程度，并且可節約膨潤土30%以上；

4、采用FAG, SKF等知名品牌軸承；

5、減少了泥餅和液流損失，降低鉆井液剪切比速率，提高凝膠強度，從而達到了國外產品的先進水平；

6、除了泵殼和葉輪之外，所有部件都是可更換的

7、開放式的葉輪，液體通過性好

8、結構緊湊，振動小，噪音小，性能穩定可靠。

9、使用壽命長，鑄鐵合金，耐磨性高。

10、機械密封結構，無泄漏，耐磨損，使用壽命長。

11、殼體采用高耐磨球磨鑄鐵，葉輪采用304L精鑄而成，環境適應性強。

12、軸承受載力大，精度高，使用壽命長。

Shear pump JQB80J shear pump QB100J shear pump QB120 shear pump

Shear pump specially used for shear polymer drilling fluid and clay, in the polymer drilling fluid system (or clay) should be sufficiently in advance after shearing, again into the drilling fluid system, improve the drilling fluid performance, to give full play to their usefulness, if there is no sufficient shear, polymer in the first cycle could jam sieve net, lose a massive amount of polymer, to increase the drilling cost, and may also make the large size of drilling fluid solid phase particles hard and difficult to get rid of; In drilling fluids, without sufficient shearing, the polymer produces many "fish eyes" that can damage the formation, reducing permeability and producing less oil and gas.

Shear pump JQB80J shear pump QB100J shear pump QB120 shear pump

Shear pump JQB80J shear pump QB100J shear pump QB120 shear pump product features

1, JQB system shear pump processing quality, high reliability.

2, the use of comprehensive mechanical sealing technology, novel and unique design, the first at home and abroad sealing performance advanced, reliable operation, and long service life;

3, greatly improve the degree of hydration of moving soil particles, and can save more than 30% bentonite;

4. FAG, SKF and other well-known brands are adopted;

5. Reduced mud cake and fluid loss, reduced drilling fluid shear rate, and improved gel strength, thus reaching the advanced level of foreign products;

6. All parts are replaceable except the pump shell and impeller

7, open impeller, good fluid permeability

8, compact structure, small vibration, small noise, stable and reliable performance.

9. Long service life, cast iron alloy, high wear resistance.

10, mechanical seal structure, no leakage, wear resistance, long service life.

11. The shell is made of cast iron with high wear-resisting ball and the impeller is made of 304L precision casting, with strong environmental adaptability.

12, bearing load, high precision, long service life.