“PH值”系列
在“PH值”系列精密行星減速箱ServoFit™是專為嚴格的扭轉和傾斜剛性需求。 Some features are:有些特點是：
§ 優秀的軸向負荷能力
§ HeliCamber® gear technology provides minimum wear, low backlash, and low noise HeliCamber ®技術提供最低齒輪磨損，低背隙，低噪音
§ Gears are case hardened to 61 Rockwell “C” and ground for maximum efficiency齒輪表面硬化至61RC和最高效率地
§ Ring gear machined integral to the housing – not welded or pressed in – provides greater concentricty and more precise alignment齒圈加工不可或缺的住房 - 不焊接或壓在 - 提供了更大的和更精確對準concentricty
§ The output flange dimensions are ISO 9409 and allow easy mounting to rotary or indexing tables, pinions, timing belt pulleys, transmission shafting, etc., without using a coupling輸出法蘭尺寸是ISO 9409，并允許便于安裝在旋轉或索引表，小齒輪，同步帶輪，傳動軸系等無需使用耦合，
§ FKM seals, for the smallest possible diameter, reduces friction and heat buildup, increases efficiency, and allows continuous duty operation without addition cooling氟橡膠密封，盡可能小的直徑，降低摩擦和熱量積累，提高效率，并允許不加冷卻連續工作操作
§ Oversized tapered roller bearings and shafts for high radial load capacity and superior torsional stiffness超大圓錐滾子軸承，軸的徑向承載能力高和優越的抗扭剛度
§ Single piece steel housing provides greater concentricity and more precise alignment單件不銹鋼外殼提供了更大的同心度和更精確的定位
§ Blind pilot hole盲導孔
§ The motor shaft adaption system allows installation in minutes without special tools.電機軸的適應系統可以在幾分鐘內沒有安裝專用工具。 The patented motor coupling is designed to allow thermal expansion of the motor shaft, ensuring long motor life by preventing thrust load on the motor bearings.獲得專利的電機耦合設計，讓電機軸的熱膨脹，確保防止推力軸承電機負載電機壽命長。 The triple-split collet, designed for greater concentricity and low inertia, is rated in excess of the gearhead torque capacity.在三重分裂夾頭，更大的同心度和低慣量設計，是在減速機額定扭矩的能力過剩。 Adapter bushings to fit all motor shafts are provided when necessary.套管適配器適合所有電機軸時提供必要的。 No shaft key is required.無軸的關鍵是必需的。
§ Also available as ServoCool (sizes PH4 thru PH10) or with input shaft也可作為ServoCool（PH10回轉體PH4通過大�。�，或帶輸入軸
PHA系列
PHA系列是非常適合的地方平穩，精確，可靠的驅動器是必要的。 Some features are:有些特點是：
§ 弧齒隙1’或更少
§ Precision selection of parts ensure optimal performance without binding gear teeth, resulting in a more accurate and smooth direct drive精密零件選擇確保沒有約束力齒最佳性能，以更準確，流暢造成直接驅動
§ Balanced clamp coupling for smooth operation at high speeds均衡的順利運作夾殼聯軸器高速
§ The FlexiAdapt™ motor coupling is designed for accurate and precise motor installation.該FlexiAdapt™是專為電機耦合準確和精確的電機安裝。 The integrated thermal expansion feature, in the shape of a bellows, compensates for linear thermal expansion of the motor shaft.集成的熱膨脹特性，在風箱的形狀，彌補了線性電機軸的熱膨脹。 Adapter bushings are provided when needed to fit any motor shaft.套管適配器時，可提供適合需要的任何電機軸。
§ 90-96% Efficiency 90-96％的效率
§ Ground and honed gearing地面和磨練負債
§ Also available as ServoCool (sizes PHA4 thru PHA10)也可作為ServoCool（大小通過PHA10 PHA4）
